Fuse Box / Consumer Unit Replacement North London
Tripping circuits, failed EICR on no RCD, or a fuse box past its life? We replace fuse boxes across all 8 North London boroughs — FuseBox or Wylex RCBO board, Type 2 SPD, full BS 7671 18th Edition Amendment 2 certification, completed in one day. Fixed price after a free survey, NICEIC-Registered (D609991), 12-month workmanship guarantee.
Why Choose Rudi Electrics
for Fuse Box / Consumer Unit Replacement in North London?
Your concerns answered — here’s why North London homeowners and landlords trust us for fuse box replacement and consumer unit upgrades.
“Will I get a fixed price or surprise extras?”
Fixed price quote after a free survey. We check incoming supply, earthing, circuits and HMO requirements before quoting — the figure you see is the figure you pay. Standard 5–7 way RCBO board from £800; 8–12 way premium boards from £950; 16+ way large-property boards from £1,200.
“How long will my power be off?”
Most installs are completed in 3–4 hours with a single short power-off window. We pre-run new tails, isolate at the main switch, swap the board, and re-energise circuit-by-circuit while testing. Fridge / freezer planning is part of the survey conversation, not a surprise on the day.
“Are you fitting a quality unit, not a cheap import?”
Only FuseBox, Wylex, Hager or Schneider consumer units — never unbranded imports. Type A or AC RCBOs as required, Type 2 SPD as standard, and AFDDs on bedroom circuits where landlord HMO compliance requires it. All BS EN 61439-3 listed.
“Will it pass building control and EICR?”
Every install is notified to Building Control through our NICEIC registration (D609991) and you receive a full BS 7671 18th Edition Amendment 2 Electrical Installation Certificate within 24 hours. Insurer-accepted, mortgage-accepted, and remedial-friendly for any future EICR.
Fuse Box / Consumer Unit Replacement Across All 8 North London Boroughs
We replace fuse boxes across the whole of North London — from Edmonton terraces in Enfield to Whetstone semis in Barnet, Crouch End villas in Haringey to Stoke Newington flats in Hackney, Kilburn HMOs in Brent to Walthamstow conversions in Waltham Forest, and Wanstead detached homes in Redbridge to Forest Gate landlords in Newham. Every borough has its own fuse-box quirks; the underlying fix is the same: a modern RCBO board sized to the property.
Common jobs across the region: EICR-driven board replacements after sale-survey or landlord-licensing fails, HMO compliance pack installs with AFDDs on bedroom circuits (mandatory under BS 7671 Amendment 2), and load-side upgrades on kitchen extensions or EV charger installations. From £800 standard, £950 premium, £1,200 large-property boards.
Boards we typically install: FuseBox 8–12 way RCBO for the standard 3-bed semi, Wylex / Hager full-RCBO 16+ way for larger detached or HMO conversions, and per-flat AFDD-protected boards for multi-let properties. Type 2 SPD on every install, no exceptions. Tap your borough below to see local pricing, real-job examples, and licensing details.
What Our Customers Say About Us
Real reviews from homeowners and landlords across all 8 North London boroughs. Live Google reviews below — for all reviews across platforms, see our testimonials page →
The new fuse box installation was done to a high standard, and the hallway lights are now working perfectly. He also made sure everything was left clean and tidy afterwards, which we really appreciated. Overall, a very reliable and knowledgeable electrician who clearly takes pride in his work. I’d happily recommend Rudi to anyone looking for electrical work done.
Rudy managed to drop by and sort out my mess of a ceiling rose and light.
Found fault to resolve tripping fusebox all in short space of time. Very courteous too. Thank you Rudy. Stress free!
Would highly recommend for small or large Electrical job
Really happy with the work, everything was done professionally, cleanly and on time. He explained everything clearly and made sure the system was safe and up to standard.
Reliable, knowledgeable and easy to deal with. Would definitely recommend for any commercial electrical work.
Took the time to go through everything with me beforehand to ensure optimal functionality as well as helping to source the right equipment.
The work was completed quickly and professionally….a real pleasure and hassle free.
Professional, efficient and great communication. Highly recommended.
What really impressed me was that he managed to fit me into his already tight schedule and came out on a Sunday to do the installation. We had a break-in a couple of days ago, so I needed the security cameras urgently and he really helped by making it happen so quickly.
The installation was very neat and professional, he explained how everything works and made sure the cameras covered all the important areas around the house.
Highly recommend Rudi Electrics if you need CCTV or security cameras installed. Reliable, professional and very helpful when you need it most.
He also took the time to explain things in simple terms, which I really appreciated. Overall, a really positive experience – I’d happily recommend him to anyone looking for a reliable electrician.
He was professional, friendly, and knew exactly what he was doing. He got everything sorted quickly and made sure everything was safe before leaving.
Highly recommend if you need a reliable electrician, especially in an emergency.
I would thoroughly recommend Rudi for his skilled work, knowledge of electrics, friendly approach, and flexibility in working around a customer’s needs.
Our Fuse Box / Consumer Unit Installations
Real jobs completed across North London — FuseBox & Wylex RCBO boards, fully certified.
Book Your Free Fuse Box / Consumer Unit Survey
Tell us about your North London property and we’ll arrange a free no-obligation survey — fixed price quote within 24 hours.
NICEIC Registered
All installs by an NICEIC Registered electrician (D609991) — fully BS 7671 18th Ed Amendment 2 compliant and accepted by mortgage lenders, insurers and Building Control.
Fixed Price Quote
Free site survey, fixed-price quote within 24 hours — no hourly billing, no surprise extras. From £800 standard, £950 premium, £1,200 large boards.
Same-Day Install
Most fuse box replacements completed in 3–4 hours on the day. Power back on the same evening with a single short isolation window.
From £800
Standard 5–7 way RCBO board from £800. Premium 8–12 way from £950. 16+ way large-property boards from £1,200. HMO compliance pack quoted bespoke.
🔒 Your details are kept private and never shared. We'll call within 24 hours.
Signs Your Property Needs a New Fuse Box / Consumer Unit
Six tells we look for in fuse-box surveys across North London. If two or more apply, a board replacement is usually the right call — not a repair.
Tripping that won’t reset
If your RCD trips and resets briefly then drops again the same evening, that’s a fault on a circuit — not a fuse box that just “needs a swap”. We isolate it during the install so the new board doesn’t inherit the same fault.
Burning smell or scorch marks
Brown discolouration around the main switch or burning plastic smell from the meter cupboard means heat damage at the consumer unit. Stop using high-load appliances and call us — this is a same-day priority job.
Wirewound or rewireable fuses
Old porcelain fuse holders with rewireable wire, or cartridge fuses with no MCBs at all, mean the board is from before 1980 and has zero RCD protection. EICR will fail it on C2; insurers may refuse claims.
Failed EICR or insurer refusal
C1 or C2 codes for “no RCD on socket circuits”, “outdated consumer unit”, or “non-compliant with current standards” are all board-level fixes. Send us the EICR and we’ll quote remedial work without a survey.
HMO licensing inspection
Council HMO licensing now requires AFDDs on bedroom circuits (BS 7671 Amendment 2). If your existing board has no AFDDs and you’re renewing a licence, the inspection will flag it. Per-flat boards with AFDD are the standard fix.
Frequent appliance damage
If your TV, fridge, or boiler PCB has died more than once in the last few years, that’s typically a Type 2 SPD problem — older boards have no surge protection. New install adds SPD as standard.
How We Replace Your
Fuse Box / Consumer Unit
Professional install from start to finish. Most fuse box replacements complete in 3-4 hours with minimal disruption to your home.
Initial Assessment
We check your incoming supply, earthing arrangement (TT vs TN-C-S), circuit count, RCD/SPD status, EICR history if any, and confirm whether AFDDs are required (HMO sleeping rooms). The survey is free with no obligation and you get a written fixed-price quote within 24 hours.
Isolation & Removal
DNO main fuse pulled with permission, existing tails isolated, old board removed cleanly. We cap and label every circuit before disconnecting so reconnection is methodical, not guesswork. No live working at any stage.
New Unit Installation
Modern consumer unit (FuseBox, Wylex, Hager or Schneider) fitted with new 25mm meter tails, 100A main switch, full RCBO protection per circuit, Type 2 SPD on the main bus, and AFDDs where required. Cables labelled and torque-checked.
Testing & Verification
Full BS 7671 testing: insulation resistance (every circuit), Zs / Ze loop impedance, RCD trip times, SPD verification, polarity checks, and earth fault path. Any pre-existing fault is logged and discussed before we re-energise.
Fault Finding (If Needed)
If a circuit fails testing on the new board (typically a hidden borrowed neutral or insulation breakdown on an existing run), we find and fix it the same day where possible. Most fixes add £80–£180; major issues are quoted before any extra work starts.
Certification & Handover
Electrical Installation Certificate issued, photographed install record, written labels inside the board, Building Control notification through our NICEIC registration, and a verbal walkthrough of the new RCBOs and SPD test buttons. 12-month workmanship guarantee starts on handover.
Fuse Box / Consumer Unit Replacement Pricing
Quick reference for North London homeowners and landlords. Fixed quotes given after a free site survey.
- ✓ New RCBO / Dual RCD consumer unit
- ✓ 100A main switch & 25mm meter tails
- ✓ Type 2 SPD surge protection
- ✓ Full BS 7671 testing & certification
- ✓ 12-month workmanship guarantee
- ★ 8–12 way full RCBO board
- ★ Individual circuit protection
- ★ Type 2 SPD & 100A main switch
- ★ FuseBox / Wylex / Hager premium unit
- ★ Priority install scheduling
- ✓ 16+ way full RCBO board
- ✓ Individual circuit protection
- ✓ Type 2 SPD & 100A main switch
- ✓ Full circuit schedule documentation
- ✓ 12-month workmanship guarantee
Fuse Box / Consumer Unit Replacement North London — Across All Property Types
From Victorian terraces in Palmers Green to modern Wembley Park flats and Hackney HMO conversions — we replace fuse boxes across every North London property type. Each comes with its own quirks, and we know what to look for.
Victorian & Edwardian Terraces
📍 Edmonton, Palmers Green, Crouch End, Hornsey, Kilburn, Walthamstow
Wirewound or rewireable fuse boxes from before 1970. No RCD protection. TT earthing systems with corroded earth electrodes. Borrowed neutrals between landings. Period meter cupboards with cable-routing constraints.
FuseBox or Wylex RCBO board, conversion to TN-C-S earthing where DNO supply allows, dedicated bonding to incoming gas/water, SPD as standard. Period switch fittings and cornicing preserved.
1920s–1970s Semis & Detached
📍 Southgate, Cockfosters, Mill Hill, Wembley, Sudbury, Chingford, Wanstead
1980s Wylex MCB boards now end of life. Single 30mA RCD covering the whole house. Kitchen extension circuits T-off the original ring. Undersized 16mm meter tails on extensions.
Full RCBO upgrade sized to circuit count, 25mm meter tails replacing 16mm, Type 2 SPD on the main bus, supplementary bonding verified in updated bathrooms.
Modern New Build & Regeneration
📍 Meridian Water, Stratford, Royal Docks, Wembley Park, Tottenham Hale, Blackhorse Lane
Developer-spec dual-RCD boards already at limit. EV chargers fitted on tail T-offs (non-compliant). Smart-home and home-office loads pushing single circuits over rating.
Full-RCBO upgrade with dedicated EV charger way, SPD, labelled circuit schedule, spare ways for future heat-pump or solar.
HMO Conversions & Multi-Let
📍 Edmonton, Tottenham, Hackney, Kilburn, Walthamstow, Forest Gate, Ilford
Single board feeding multiple flats (non-compliant). No AFDD on bedroom circuits (mandatory under BS 7671 Amendment 2 for HMO sleeping accommodation). Failed Council licensing inspections across all 8 boroughs.
Per-flat consumer units with AFDDs, communal-area circuits on landlord supply, BS 5839-6 alarm interface, EI4 emergency lighting, EICR at handover suitable for borough licensing.
Need a fuse box upgrade for your North London property?
Fuse Box / Consumer Unit Replacement North London FAQs
Clear answers to the most common questions North London homeowners and landlords ask about fuse box replacement, consumer unit upgrades, EICR-driven installs, and HMO compliance.
For official guidance, visit Electrical Safety First or read the Building Regulations guidance.
How much does a fuse box replacement cost in North London? ▼
Standard 5–7 way RCBO board from £800; 8–12 way premium board from £950; 16+ way large-property board from £1,200. HMO compliance pack with per-flat boards + AFDDs is quoted bespoke after survey (typically £1,500–£2,500+ per property depending on flat count).
All prices include FuseBox / Wylex / Hager unit, 100A main switch, 25mm meter tails, Type 2 SPD, full BS 7671 testing, Electrical Installation Certificate, and Building Control notification through our NICEIC registration. Fixed price after free survey — no hidden extras.
Which North London boroughs do you cover? ▼
All 8: Enfield, Barnet, Haringey, Hackney, Brent, Waltham Forest, Redbridge and Newham. Every postcode in those boroughs is served from our Edmonton (N18) base, with same-week survey availability across the region. Tap your borough above for local pricing, real-job examples and HMO licensing details specific to that council.
Do I need a full rewire too, or just a fuse box? ▼
Most installs we do in North London are board-only. The existing wiring is sound; the board is past its life or the EICR flagged no RCD. We test every circuit during installation; if one fails (usually a hidden borrowed neutral or insulation breakdown), we either fix it the same day or quote it separately.
If multiple circuits fail testing, that’s when a partial or full rewire conversation happens. We tell you straight, with the failure data in front of you. No upselling.
What does HMO licensing require for the consumer unit across the 8 boroughs? ▼
All 8 boroughs require full BS 7671 18th Edition Amendment 2 compliance for licensed HMOs. The minimum is: AFDDs on every bedroom circuit, RCBO per circuit (no shared RCDs), per-flat consumer units on multi-let properties, and a 5-yearly EICR. Newham, Hackney and Brent run the strictest licensing regimes; Barnet, Enfield, Haringey and Waltham Forest run Article 4 / selective licensing in much of the borough.
We do the full HMO compliance pack as one job: per-flat boards, AFDDs, BS 5839-6 alarm interface, EI4 emergency lighting, and EICR at handover suitable for licensing submission.
How long does a fuse box replacement actually take? ▼
Plan for 3–4 hours on site for a standard install, with one short power-off window of about 90 minutes during the swap itself. Larger 16+ way boards or HMO installs with AFDDs run closer to 5–6 hours. Same-day completion is standard — we don’t leave a job overnight without a working board.
Will my new board pass EICR and insurance inspection? ▼
Yes — every install is to BS 7671 18th Edition Amendment 2, notified to Building Control through our NICEIC registration (D609991), and certified with a full Electrical Installation Certificate within 24 hours. The certificate is accepted by mortgage lenders, home insurers, landlord licensing schemes, and any future EICR will treat the board itself as satisfactory — only existing-circuit issues from before our work would code on a future inspection.
Need a Fuse Box / Consumer Unit Replacement
in North London?
Professional fuse box replacement and consumer unit installation across all 8 North London boroughs — Enfield, Barnet, Haringey, Hackney, Brent, Waltham Forest, Redbridge, and Newham. Free site survey, fixed prices, fully certified BS 7671 18th Ed Amendment 2.
