Why Choose Rudi Electrics for Consumer Unit Replacement in Southgate?
Your concerns answered — here’s why Southgate homeowners and landlords trust us for consumer unit installations.
“Will I get the price you quote?”
Fixed price guarantee before we start. We inspect your existing board, assess the work required, and give you an exact price upfront — no surprises, no “extras discovered” halfway through the job.
“How long will my power be off?”
3-5 hours typical installation time. We work efficiently to minimise disruption — most homes are back up and running the same day. We’ll coordinate with your energy supplier for any meter work needed.
“Are you using quality brands or cheap imports?”
Premium brands only — Hager, Fusebox, or equivalent. We don’t cut corners with budget boards from unknown manufacturers. Your new consumer unit comes with full manufacturer warranty plus our 12-month workmanship guarantee.
“Will it pass building control and be properly certified?”
Fully certified and compliant. You’ll receive an Electrical Installation Certificate with full test results, photographs of the work, and Building Regulations notification. All work meets 18th Edition BS 7671 standards.
Consumer Unit Installation in Southgate N14
Southgate N14 is predominantly 1930s semis and larger detached homes — many of which still have the original consumer units fitted when the properties were built. These old split-load boards with basic RCD protection no longer meet current standards and frequently fail EICR inspections. We carry out consumer unit upgrades throughout N14, typically upgrading to a modern 18th Edition RCBO board that gives individual protection to every circuit.
Larger Southgate properties on roads like Chase Side and Bramley Road often have 16+ circuits and may include garage or outbuilding supplies that need bringing up to standard at the same time. We assess all of this at the initial survey and include everything in a single fixed quote — no surprises on the day. EICR testing can be carried out on the same visit if required. We cover Southgate as part of our wider consumer unit installation service across North London. For general electrical work in Southgate, see our electrician Southgate page.
What Our Customers Say About Us
Real reviews from homeowners across Southgate — on Google.
Our Consumer Unit Installations
Real jobs completed across North London — FuseBox & Wylex RCBO boards, fully certified.
How We Install Your
Consumer Unit in Southgate
Professional installation from start to finish. Most installations are completed in 3-4 hours with minimal disruption to your Southgate home.
Initial Assessment
We inspect your existing installation, check the incoming supply, and assess your property's electrical needs. We'll identify the right size and type of consumer unit for your home.
Isolation & Removal
We safely isolate the supply (coordinating with your DNO if required). The old consumer unit is carefully disconnected and removed, with all circuits labeled for reconnection.
New Unit Installation
The new consumer unit is securely mounted and all circuits are reconnected with proper labeling. We install RCDs/RCBOs, SPD surge protection, meter tails upgrade, and ensure proper earthing and bonding throughout.
Testing & Verification
Comprehensive testing of all circuits: insulation resistance, continuity, earth fault loop impedance, RCD trip times. We verify everything meets BS7671 regulations and works safely.
Fault Finding (If Needed)
Up to 2 hours of complimentary fault finding is included if any issues arise after installation. If a circuit doesn't work or trips, we diagnose and resolve basic issues on the spot. Larger repairs requiring additional work will be quoted separately.
Certification & Handover
You receive your Electrical Installation Certificate, circuit schedule, and full documentation. We explain how your new consumer unit works, demonstrate the RCD test button, and answer any questions.
Consumer Unit Installation Pricing
Southgate
Fixed prices with no hidden costs. You'll always receive a fixed price before work starts.
- ✓ New RCBO / Dual RCD consumer unit
- ✓ 100A main switch
- ✓ SPD surge protection
- ✓ Meter tails upgrade
- ✓ Full installation & wiring
- ✓ Testing & certification
- ✓ 12-month workmanship guarantee
- ★ 8–12 way full RCBO board
- ★ Individual circuit protection
- ★ 100A main switch
- ★ SPD surge protection
- ★ Meter tails upgrade
- ★ Premium brand unit
- ★ Priority scheduling
- ✓ 16+ way full RCBO board
- ✓ Individual circuit protection
- ✓ 100A main switch
- ✓ SPD surge protection
- ✓ Meter tails upgrade
- ✓ Premium brand unit
- ✓ Full documentation pack
Southgate N14: Larger semis and detached homes often have more circuits — 16-way boards are common here. Fixed price confirmed at survey including any earthing work. Garage/outbuilding circuits assessed at same time.
Book Your Consumer Unit Upgrade in Southgate
Tell us about your property and we'll get back to you within 24 hours with a fixed price quote.
NICEIC Registered
All consumer unit upgrades are self-certified and notified to building control — fully compliant with BS 7671 18th Edition.
Same-Day Completion
Most upgrades complete in a single day — certificate issued on completion, no return visits needed.
RCD Protection
All new consumer units include full RCD protection — Arc Fault Detection (AFDD) available for enhanced safety.
From £450
Fixed price upgrades from £450 — price agreed before work starts, no hidden extras.
🔒 Your details are kept private and never shared. We'll call within 24 hours.
Professional Consumer Unit Installation in Southgate — Across All Property Types
From Victorian terraces in Enfield Town to new builds in Ponders End — we've installed modern consumer units across Enfield EN1, EN2 and EN3. Here's how we upgrade the unique electrical systems each property type requires.
Edwardian & Arts and Crafts Villas
📍 Cannon Hill, The Bourne, Chase Road, Fox Lane, Winchmore Hill Road
Southgate's large Edwardian villas frequently have original ceramic fuse boxes or early 1970s boards with no individual circuit protection. These are high-value properties and a failed EICR or mortgage survey flag is a serious inconvenience. The scale of these properties means a correctly sized board (14–20 ways) is essential — an undersized replacement creates problems immediately.
Correctly sized RCBO consumer unit — we count all circuits during the initial survey and specify accordingly. Southgate's largest Edwardian properties may have 14+ circuits requiring a 20-way board. Mains earth upgraded, all bonding verified. Full consumer unit replacement typically takes 5–7 hours on larger Southgate properties.
1930s Metroland Semis & Detached
📍 Aldermans Hill, Waterfall Road, Bramley Road, Broomfield Lane, Southgate Green
Southgate's 1930s Metroland properties often have 1990s split-load boards — adequate when installed but now increasingly failing EICR requirements and insurance checks. These properties also commonly have garage circuits, garden circuits, and outbuilding supplies that add to the circuit count and require a board with sufficient ways.
Modern RCBO board with capacity for existing circuits plus garage and outbuilding supplies. We assess all circuits during the survey — any circuits that fail insulation resistance testing are flagged and priced separately before work starts. Most 1930s Southgate semis complete in 3–5 hours.
Post-War & Modern Flats
📍 Southgate Circus, High Street, Ashmole Estate, Walker Close, Chase Road
Purpose-built flats near Southgate station and on the main routes often have 1970s–80s consumer units with two-way split protection — inadequate by modern standards. Leaseholders may need freeholder permission before upgrading the consumer unit. We coordinate with managing agents where required and provide full documentation for leaseholder compliance.
Flat consumer unit upgrade with leasehold compliance — we check building management requirements before specifying the replacement board. Electrical Installation Certificates issued, accepted by Enfield Council for landlord licensing. We've completed consumer unit upgrades throughout the flat stock in Southgate N14.
Extended Properties & Loft Conversions
📍 Throughout Southgate N14 — rear extensions, loft conversions, large plots
Southgate's quality housing attracts significant improvement works. Loft conversions add 4–6 new circuits to an existing board — if the existing unit has no spare ways, it must be replaced rather than extended. Extension wiring adds further circuits. The combined demand frequently exceeds what the original board was specified to handle.
Consumer unit upgrade as part of the extension works — we assess the existing board and specify the replacement in the context of the full installation including extension circuits, loft conversion circuits, and any planned EV charger or home office supply. One upgrade that covers everything rather than multiple returns.
Need a consumer unit upgrade for your Southgate property?
Consumer Unit Installation in Southgate - FAQs
Clear answers to the most common questions about fuse box upgrades and consumer unit installations in Southgate.
How long does a consumer unit installation take in Southgate N14? ▼
Most standard fuse box upgrades (consumer unit replacements) take between 3 to 4 hours. This includes full installation, SPD surge protection, meter tails upgrade, testing, and certification. Larger properties may take slightly longer. We'll always confirm the expected time before starting.
Will my power be off during the installation? ▼
Yes — your power will need to be isolated while we safely replace your fuse box or consumer unit. This typically lasts for a few hours. We aim to restore power as quickly as possible and will let you know the expected downtime in advance.
Will I receive an electrical certificate? ▼
Yes. Every installation includes a full Electrical Installation Certificate (EIC) and building regulations notification. This proves your new consumer unit is fully compliant with BS7671 wiring regulations.
What happens if one of my circuits fails testing? ▼
If a circuit doesn't meet current safety standards, we'll clearly explain the issue and your options. We include up to 2 hours of complimentary fault finding to diagnose and resolve basic issues on the spot. Larger repairs requiring additional work will be quoted separately. We never proceed with extra work without your approval.
What's included in the fuse board upgrade price? ▼
Every fuse box replacement includes: the new consumer unit with 100A main switch, full RCBO or dual RCD protection, SPD surge protection (mandatory under BS7671), meter tails upgrade, all installation work, comprehensive testing, certification, and up to 2 hours of fault finding. There are no hidden costs.
What about earthing and bonding upgrades? ▼
We upgrade the mains earth as standard if needed for compliance. Additional bonding work (such as gas and water bonding connections throughout the property) is available at an additional charge if your installation requires it. We'll assess and advise you before proceeding.
What's the difference between RCD and RCBO circuit breakers? ▼
Our £800 standard package offers either a 6-way RCBO board or 10-way dual RCD board. RCBOs (individual circuit breakers with RCD protection) provide individual protection for each circuit, meaning a fault on one circuit won't shut down the whole property. Our £950 and £1,200 packages come with full RCBO boards for maximum convenience and reliability.
Should I replace my old fuse box? ▼
If your fuse box has rewirable fuses or is over 25 years old, we strongly recommend upgrading to a modern consumer unit. Older fuse boxes lack essential safety features like RCD protection and surge protection (SPD), which are now mandatory under current regulations. A modern consumer unit provides better protection for you, your family, and your property.
Do you cover Southgate N14 for consumer unit installation? ▼
Yes — we cover all of Southgate N14 including the village area, Southgate Green, Cannon Hill, The Bourne, Fox Lane, Bramley Road, and Aldermans Hill. Southgate's housing is predominantly high-quality Edwardian and 1930s stock — we're experienced with the consumer unit configurations most commonly found in N14 properties and carry board sizes suited to these larger homes.
How much does a consumer unit replacement cost in Southgate? ▼
Our consumer unit installations start from £800 for a standard 6-10 way unit, £950 for an 8-12 way premium board, and £1,200 for larger properties. Call us on 07932 772050 or use our online booking to get an exact price based on your property.
Need a Consumer Unit Upgrade
in Southgate?
Professional consumer unit installation across Southgate N14 and all surrounding North London areas. Fixed prices, same-day installation, fully certified. Fixed prices, same-day installation, fully certified.




















