House Rewiring
Brent
Worried about outdated wiring, too few sockets or circuits that no longer suit your Brent property? We check how terraces & converted houses and high-density apartment buildings affect retained wiring and new routes, then agree the necessary work before it starts.
NICEIC Registered Electrician · 15+ Years Experience · Full Certification Included · 5-Star Rated on Google
Your House Rewiring Worries Answered in Brent
Worried about disruption, moving out, losing power or paying for more work than your home needs? Here is what we check and agree before rewiring starts.
Will rewiring make a huge mess of my home?
Rewiring needs access to cable routes, so some lifting, drilling or wall chasing may be necessary. Before quoting, we explain where access is likely to be needed, protect the working areas and state what electrical making-good is included and what will still need a decorator.
Will I need to move out or be left without power?
That depends on the scope, layout and whether the property is occupied. We agree the safe working plan before starting, explain when circuits must be switched off and, where practical, sequence the work so essential power can be restored between stages. We confirm after the survey whether staying in the property is realistic.
Does the whole house really need rewiring?
Not always. Inspection and testing establish which existing circuits are safe and suitable to retain. If a partial rewire is the sensible option, the quotation separates retained wiring from new work and explains why; we do not recommend a full rewire from property age or an old fuse box alone.
How will I know the price, timescale and exactly what is included?
After the survey, the written quotation sets out the agreed rooms and circuits, accessory positions, cable routes, testing, certification, making-good responsibilities and expected programme. Any requested change or additional fault is discussed before it becomes extra work.
House Rewiring in Brent — Brent NW10, HA9 & NW6
Brent properties do not all present the same electrical layout. The survey separates 1930s Semis & Detached Homes from Victorian Terraces & HMOs before the work is specified.
That distinction guides access, circuit testing and the written house rewiring scope without relying on unsupported assumptions about the address.
A recent example: a Wembley HA9 1930s semi where the EICR had failed on degraded TT earthing and missing RCD on the shower circuit. Full rewire from the consumer unit out — new earth rod, main bonding to gas/water, modern 14-way RCBO board with SPD, dedicated kitchen circuits and spare capacity for a future other high-load equipment. Customer back to full power within a week, certificate issued the same day.
What Our Customers Say About Us
Real reviews from homeowners across North London. Live Google reviews below — for all 388+ reviews across Google, Checkatrade and MyBuilder, see our testimonials page →
Book Your Free House Rewire Survey
Tell us about your property and we'll arrange a free no-obligation survey — fixed price quote before any work begins.
NICEIC Registered
Rewires are designed, installed and tested to the current requirements of BS 7671, with the applicable certification and Building Regulations documentation.
Fixed Price Quote
Free site survey, then a fixed price quote — no hourly billing, no surprise extras. You see the full scope before any work begins.
Minimal Disruption
We work room by room to keep disruption to a minimum — most 3-bed rewires complete in 3–5 days with the property occupied.
From £2,500
Partial rewires from £2,500. Full house rewires priced after survey. Always honest, always fixed.
Signs Your Brent Home Needs Rewiring
Many homes in Brent (EN1 and EN2) were built between the 1930s and 1970s. Many still have outdated wiring that poses a real safety risk. Here's what to look out for.
Tripping Fuses or Circuit Breakers
If your fuse box trips regularly — especially when using multiple appliances — your wiring can't handle modern demand. One of the most common signs we see in EN1 and EN2 properties.
Burning Smells or Scorch Marks
Any burning smell from sockets, switches or your fuse board is a serious warning sign. Scorch marks around sockets indicate arcing — a major fire hazard needing immediate attention.
Flickering or Dimming Lights
Lights that flicker or dim when you switch on appliances suggest loose connections or wiring struggling under load — signs of deteriorating electrical installation.
Old Round Pin Sockets or Rubber Wiring
Round pin sockets, brown or black rubber-coated cables, or cloth-wrapped wiring are signs of pre-1960s installation. These must be replaced — dangerous, not just outdated.
Not Enough Sockets
Relying on extension leads throughout the house means your wiring wasn't designed for modern life. Especially common in Victorian and Edwardian properties across EN1 and EN2.
Failed EICR or No Certificate
A recent EICR in Brent with a C1 or C2 code, or no certificate at all, means a rewire is often the most cost-effective solution over multiple repairs.
How We Complete Your House Rewire
Professional rewiring from start to finish. Most 2-3 bedroom houses take 5-7 days, while partial rewires can be completed in 1-3 days depending on scope.
Free Site Survey
We visit your property to assess the current wiring, discuss your requirements, check access to cables, and confirm the scope of work. This survey is completely free with no obligation.
Fixed Price Quote
You'll receive a detailed fixed-price quote covering all materials, labour, testing, and certification. No hidden costs—the price we quote is the price you pay.
Schedule & Prepare
Once you accept the quote, we schedule the work at a time that suits you. We'll advise on any preparation needed and confirm our arrival time. Materials are ordered and delivered to site.
First Fix Wiring
We run all new cables through walls, floors, and ceilings. Floorboards are carefully lifted, cables are routed neatly, and protection is installed. We use dust sheets and clean up daily to minimize disruption.
Second Fix & Accessories
All sockets, switches, light fittings, and accessories are installed. We fit the new new consumer unit with RCBO protection, connect all circuits, and ensure everything is properly labelled.
Testing & Certification
Full electrical testing including insulation resistance, earth fault loop impedance, and RCD trip times. You receive an Electrical Installation Certificate, full test results, and Building Control notification.
House Rewiring Pricing
Quick reference for Brent borough homeowners. Fixed quotes given after a free site survey.
- ✓ Targeted scope — kitchen, room, or extension
- ✓ New sockets, switches & cabling
- ✓ Full testing & applicable electrical certification
- ✓ 12-month workmanship guarantee
- ★ Complete house rewire — all circuits
- ★ New RCBO consumer unit upgrade
- ★ Full testing & applicable electrical certification
- ★ 12-month workmanship guarantee
- ✓ Full rewire + premium consumer unit
- ✓ Multiple circuit design
- ✓ Full testing & applicable electrical certification
- ✓ 12-month workmanship guarantee
House Rewiring Planning for Brent Property Types
Four property situations that change routes, disruption and the practical scope in Brent.
Swipe to explore all property types
1930s Semis & Detached Homes
📍 Wembley HA9, Kingsbury, Cricklewood NW2
Does 1930s Semis & Detached Homes need a full rewire, or can safe wiring remain? Property age alone does not decide the scope. The existing circuits, proposed room use and test results must show which wiring can remain and which sections genuinely need replacement.
For 1930s Semis & Detached Homes, assessing terraces & converted houses means inspection and testing establish which circuits can remain, then the proposed layout sets the boundary between retained wiring and new work. The written scope names every retained section rather than assuming the same answer for the whole property. The written scope follows the checked layout around Wembley HA9.
Victorian Terraces & HMOs
📍 Willesden NW10, Harlesden, Cricklewood
How will cable routes and making good be handled in Victorian Terraces & HMOs? Floors, ceilings, original finishes and occupied rooms can limit the cleanest route. Chasing, lifted areas, visible containment and making-good responsibilities need to be clear before work starts.
When planning high-density apartment buildings for Victorian Terraces & HMOs, proposed cable routes stop at the correct ownership boundary, with any common-area access or permission identified before the quotation. This makes the disruption and making-good boundaries visible before the route is approved. The written scope follows the checked layout around Willesden NW10.
Edwardian Conservation & Period
📍 Kilburn NW6, Queens Park, Kensal Green
Can power remain available while Edwardian Conservation & Period is rewired? Some circuits may remain available during planned stages, but this depends on safe circuit boundaries, access and occupancy. A generic promise to keep every room powered would be misleading.
Rewiring around maisonettes & split-level homes in Edwardian Conservation & Period requires a defined sequence: isolation and access are agreed with the relevant owner, tenant or managing agent so separately occupied areas are not treated as one installation. Those constraints are agreed at survey stage and carried into the written programme. The written scope follows the checked layout around Kilburn NW6.
Home Offices & Small Workspaces
📍 Wembley HA9, Kingsbury, Cricklewood NW2 · Home Offices & Small Workspaces
Can Home Offices & Small Workspaces be planned for future electrical, data and security needs? Socket, lighting, appliance, data and security positions are easier to coordinate before routes close. Future provision still has to match the verified supply and consumer-unit design.
When Home Offices & Small Workspaces need provision for home offices & small workspaces, likely appliance, work, data and security requirements are planned before finishes close the routes, with practical spare capacity identified at the board. The final design remains tied to the verified supply and circuit plan. The written scope follows the checked layout around Wembley HA9.
Need a house rewiring quote in Brent?
House Rewiring Across Brent Borough
We rewire properties across the London Borough of Brent — from Wembley and Kingsbury in the north to Kilburn and Cricklewood in the south. Tap your area or call 07932 772050 for a free survey.
House Rewiring Questions for Brent
Property-specific questions for Brent, followed by practical answers about house rewiring.
What does a house rewire cost in Brent?
Our Brent rewire pricing:
- Partial rewire (1-2 zones): from £2,500
- 2-3 bed full house: £4,500-£6,500
- 4+ bed / period property: £7,500-£12,000+
- HMO rewire (5-6 bed): £8,500-£14,000+
Pricing depends on property age, accessibility, scope of consumer unit, and HMO requirements. Every quote is fixed-price after a free site survey.
What rewire issues are typical on Brent 1930s semis?
Wembley HA9 and Kingsbury 1930s semis consistently show three recurring issues we replace on rewire:
- Original TT earthing with degraded earth rods — earth-loop impedance outside acceptable limits, automatic C2 fail at EICR.
- No RCD protection on shower or kitchen circuits.
- Ageing rubber-insulated cable in lofts — borderline C1/C2, fire risk where loft insulation has been added on top.
Properties rewired in the last 15-20 years typically need only a partial rewire to bring up to current 18th edition (Amendment 2).
I run an HMO in Willesden NW10 — what's different about an HMO rewire?
HMO rewires in NW10 (and Harlesden, both heavily licensed under Brent Council additional licensing) require:
- Interlinked smoke and heat alarms to BS 5839-6 Grade D LD2 with battery backup
- Emergency lighting on escape routes to BS 5266-1
- Fire-rated downlights in fire-compartment ceilings
- AFDDs on bedroom and high-risk circuits
- Per-letting-room certification — Brent's licensing team regularly requests the full pack
Most 5-6 bed HMO rewires take 8-12 days.
My EICR failed on a Wembley HA9 semi — does that mean a full rewire?
Almost never. Most Brent EICR fails reduce to a handful of specific remedials:
- Missing RCD on a shower circuit: £180-280
- Degraded earth rod replacement on TT-earthed semis: £200-380
- Main bonding to gas/water: £180-260
- One-zone partial recable: £400-900
Full rewires are needed in about 1 in 8 cases — usually older Willesden NW10 conversions with original VIR throughout. The C1/C2 codes tell you what's legally required; C3 codes are recommendations only.
How long does a rewire take, and can I live in the house with kids or pets while it's happening?
Typical timings:
- Partial rewire (1-2 zones): 1-3 days
- 2-3 bed full house: 5-7 days
- 4+ bed full house: 6-10 days
- Period property with feature retention: 7-12 days
- HMO (5-6 bed): 8-12 days
You can stay in the house during the work but it's disruptive — no power for 4-6 hours per day in the room being worked on, dust, occasional drilling, walls and floors temporarily exposed. Most families with kids choose to stay elsewhere for the noisy first-fix days (2-3 days) and return for second-fix and snagging.
Can I do a partial rewire — just the kitchen, ground floor, or consumer unit?
Yes — partial rewires are common and often the right call when only specific circuits or zones are failing. Typical partial scopes:
- Kitchen rewire only: From £950.
- Ground floor only: £1,500-£2,500.
- Consumer unit upgrade only: From £800.
- EICR remedial work: Quote depends on the specific remedials.
Honest answer: if your EICR has multiple C2 codes spread across most circuits, a full rewire often works out cheaper than fixing each remedial individually.
Need a House Rewire in Brent?
Honest, fixed-price quotes after a free survey. NICEIC-Registered, fully certified, and finished tidy — ready for decoration. Covering Brent NW10, HA9, NW6 and surrounding areas.
